Metal RFID Card Reader installation

To install the Metal RFID Card Reader, we need to understand it first. If you don't know it, you can find the installer to install it. The Metal RFID Card Reader acts as a card reading device and plays an important role in the access control system. Therefore, the correct installation allows the access control system. For better operation, the following describes the installation steps of the Metal RFID Card Reader:
1. First, let's take the installation tutorial of an FC-191 Metal RFID Card Reader as an example. When we got a metal card reader, we unpacked it and took the instructions out for a closer look.
2. According to the installation instructions, remove the bottom screw of the Metal RFID Card Reader, separate the back plate from the main unit, and attach the attached hole sticker to the position to be installed (the position is recommended on the same side of the shoulder height as the access control power supply).
3. Then the Metal RFID Card Reader pastes the hole sticker, and the hole pattern of the installation sticker is punched, and then the metal back plate is mounted on the wall with standard screws.
4. Pass the pre-prepared wires through the holes in the metal backplane and connect them to the Metal RFID Card Reader. The cable installation instructions indicate wiring.

5. After the wiring is completed, nest the metal card reader host into the backplane and pay attention to the smoothness of the line. Then use a standard screw to screw the screw hole under the Metal RFID card reader to complete the installation.
Seeing the above 5 operations is not very simple.

评论

发表评论

此博客中的热门博文

Analysis of Access Control Board TCP/IP Communication Mode

图片
Access Control Board networking solution realizes communication automation, office automation and management automation. It is based on integrated wiring system and uses computer network as a bridge to realize comprehensive management of communication system and office automation system. TCP/IP communication protocol is the current computer network universal standard protocol, which has the advantages of fast transmission speed, international standard and good compatibility. The access mode of the controller is the same as that of the HUB of the local area network and the computer network card. 1. Communication distance: In a small local area network, the communication distance can be extended by the cascade of HUB. The communication distance of each level is up to 100 meters, and multiple levels can be cascaded. Moreover, in large-scale local area networks, it can be extended to a long distance or even a few kilometers through various methods such as fiber-optic wireless, and ev
阅读全文

The role and basic classification of Metal RFID Card Reader

图片
The role of Metal RFID Card Reader The Metal RFID Card Reader is a device for reading data (biometric information) in a card. It is an access control component that directly contacts the user. Its function is to read and identify the identity information of the entrant. Typically, identity information can be card number, personal password, fingerprint or other important information used to identify and prove an individual's identity. Metal RFID Card Reader is an important part of the access control system. It is the key equipment for the signal input of the access control system. If the access control system is compared to one person, the Metal RFID Card Reader is like a human eye. It is related to the stability of the entire access control system. If an access control system controller and electric lock are good, if the quality of the card reader is problematic, it will also cause the door to open, which will affect the acceptance and use of the project. Basic classific
阅读全文

Access Control System and NFC Technology Realize the Development of Mobile Access Control

图片
With the development of NFC, the access control system extends the wireless access control device based on this technology, which has no complicated wiring and no noisy wall piercing. This also adds new vitality to the access control system category, and integrates into the ranks of the access control system, adding a beautiful landscape to the convenient office. The mobile access control of NFC technology is constantly upgraded, which will lead the access control system to a safer development stage. So what is the access control of NFC technology? If you talk about the NFC function of your mobile phone, I believe that everyone is no stranger. It is implemented by NFC technology, also known as short-range communication, which is a communication protocol that allows two electronic devices to communicate at a distance of a few centimeters. Combined with this technology, mobile access control, it can combine the door lock with the access control machine, simplify the redundant part
阅读全文