Connection instructions for Metal Access Control

Access control card reader, I believe everyone is familiar, but how many people know the way Metal Access Control wiring? The following small series will give you a detailed introduction to the method of access control card reader wiring.

Metal Access Control is specifically designed for electric locks and safety systems. Thanks to the metal housing design, it has a more powerful identification and anti-interference characteristics. From the above figure, we can understand the wiring method of Metal Access Control, which is actually very simple. Below we introduce the performance of the Metal Access Control's wiring port in text form.
+12V: positive working power supply, input range is DC9-13.8V (rated at 12V best);
GND: the negative pole of the working power supply, which is also the common ground of the signal;
NC: relay normally closed point, current load capacity DC3A/30V;
COM: relay common point, current load capacity DC3A/30V;
NO: The relay is always open, the current load capacity is DC3A/30V;
PUSH: Exit button switch, low level unlock;
DOOR: door status switch, link door magnetic switch, low level means door closing;
ALM: alarm output port, low level when there is alarm, current load 100mA;
FIRE: access alarm signal (connected to GND trigger);
BELL: Connect the doorbell switch.

(From FCARD Security Information, welcome to visit: http://www.pc15.net/view_4342.html)

评论

发表评论

此博客中的热门博文

The role and basic classification of Metal RFID Card Reader

图片
The role of Metal RFID Card Reader The Metal RFID Card Reader is a device for reading data (biometric information) in a card. It is an access control component that directly contacts the user. Its function is to read and identify the identity information of the entrant. Typically, identity information can be card number, personal password, fingerprint or other important information used to identify and prove an individual's identity. Metal RFID Card Reader is an important part of the access control system. It is the key equipment for the signal input of the access control system. If the access control system is compared to one person, the Metal RFID Card Reader is like a human eye. It is related to the stability of the entire access control system. If an access control system controller and electric lock are good, if the quality of the card reader is problematic, it will also cause the door to open, which will affect the acceptance and use of the project. Basic classific
阅读全文

Analysis of Access Control Board TCP/IP Communication Mode

图片
Access Control Board networking solution realizes communication automation, office automation and management automation. It is based on integrated wiring system and uses computer network as a bridge to realize comprehensive management of communication system and office automation system. TCP/IP communication protocol is the current computer network universal standard protocol, which has the advantages of fast transmission speed, international standard and good compatibility. The access mode of the controller is the same as that of the HUB of the local area network and the computer network card. 1. Communication distance: In a small local area network, the communication distance can be extended by the cascade of HUB. The communication distance of each level is up to 100 meters, and multiple levels can be cascaded. Moreover, in large-scale local area networks, it can be extended to a long distance or even a few kilometers through various methods such as fiber-optic wireless, and ev
阅读全文

Access Control System and NFC Technology Realize the Development of Mobile Access Control

图片
With the development of NFC, the access control system extends the wireless access control device based on this technology, which has no complicated wiring and no noisy wall piercing. This also adds new vitality to the access control system category, and integrates into the ranks of the access control system, adding a beautiful landscape to the convenient office. The mobile access control of NFC technology is constantly upgraded, which will lead the access control system to a safer development stage. So what is the access control of NFC technology? If you talk about the NFC function of your mobile phone, I believe that everyone is no stranger. It is implemented by NFC technology, also known as short-range communication, which is a communication protocol that allows two electronic devices to communicate at a distance of a few centimeters. Combined with this technology, mobile access control, it can combine the door lock with the access control machine, simplify the redundant part
阅读全文