Common four access control systems

The access control system is a system that controls the entrance and exit passages. It is developed on the basis of traditional door locks. In recent years, with the development of proximity card technology and the development of biometric technology, fingerprint access control systems, iris access control systems, facial recognition access control systems, and the like have emerged. In general, it can be divided into four types of access control systems. Today, Xiaobian takes everyone to understand them.


1. Not connected to the access control system:

It is an access control device management door, can not be controlled and managed with computer software, can not see the access record, directly through the device to control. The feature is that the price is cheap, the installation and maintenance is simple, the record cannot be viewed, and it is not suitable for places with more than 50 people.

2. RS485 network access control system:

It can be used as an access control device for communicating with a computer and can be managed directly using software, including card and event management. Therefore, it is easy to manage, centralized, and can view records, analyze and process records, and so on. The feature is that the installation and maintenance are more difficult, but the training is simple, the safety is high, the performance is stable, etc. It is suitable for the project with many people and multiple doors.


3.TCP/IP access control system:

It is also known as an Internet access control device that can be used to network computers and access control Board via a network cable. In addition to all the advantages of RS485 access control equipment, it also has a fast running speed, simpler installation, and can manage multiple doors across the network. However, the price of the equipment is high, and it is suitable for installation in large engineering projects, places where speed and cross-regional management are required.

4. Fingerprint access control system:

It is an access control device that biometric technology replaces the card for management. It has the same characteristics as RS485, but has better security. The disadvantage is that the number of registered people is small, and the speed is affected by the fingerprint verification speed of the person.

评论

发表评论

此博客中的热门博文

The role and basic classification of Metal RFID Card Reader

图片
The role of Metal RFID Card Reader The Metal RFID Card Reader is a device for reading data (biometric information) in a card. It is an access control component that directly contacts the user. Its function is to read and identify the identity information of the entrant. Typically, identity information can be card number, personal password, fingerprint or other important information used to identify and prove an individual's identity. Metal RFID Card Reader is an important part of the access control system. It is the key equipment for the signal input of the access control system. If the access control system is compared to one person, the Metal RFID Card Reader is like a human eye. It is related to the stability of the entire access control system. If an access control system controller and electric lock are good, if the quality of the card reader is problematic, it will also cause the door to open, which will affect the acceptance and use of the project. Basic classific
阅读全文

Analysis of Access Control Board TCP/IP Communication Mode

图片
Access Control Board networking solution realizes communication automation, office automation and management automation. It is based on integrated wiring system and uses computer network as a bridge to realize comprehensive management of communication system and office automation system. TCP/IP communication protocol is the current computer network universal standard protocol, which has the advantages of fast transmission speed, international standard and good compatibility. The access mode of the controller is the same as that of the HUB of the local area network and the computer network card. 1. Communication distance: In a small local area network, the communication distance can be extended by the cascade of HUB. The communication distance of each level is up to 100 meters, and multiple levels can be cascaded. Moreover, in large-scale local area networks, it can be extended to a long distance or even a few kilometers through various methods such as fiber-optic wireless, and ev
阅读全文

Access Control System and NFC Technology Realize the Development of Mobile Access Control

图片
With the development of NFC, the access control system extends the wireless access control device based on this technology, which has no complicated wiring and no noisy wall piercing. This also adds new vitality to the access control system category, and integrates into the ranks of the access control system, adding a beautiful landscape to the convenient office. The mobile access control of NFC technology is constantly upgraded, which will lead the access control system to a safer development stage. So what is the access control of NFC technology? If you talk about the NFC function of your mobile phone, I believe that everyone is no stranger. It is implemented by NFC technology, also known as short-range communication, which is a communication protocol that allows two electronic devices to communicate at a distance of a few centimeters. Combined with this technology, mobile access control, it can combine the door lock with the access control machine, simplify the redundant part
阅读全文